Serie
TA37

Actuadores Lineales

Heavy-Load Linear Actuators For Healthcare  | TA37 - TiMOTION

El TA37 ha sido diseñado específicamente para las mesas de examen (masaje, terapia, osteopatía, fisioterapia) pero también para sillones dentales.


Caracterísiticas Generales

  • Carga máxima: 12 000 N (empuje)

  • Velocidad máxima con carga máxima: 5.3mm/s

  • Velocidad máxima sin carga: 31.1mm/s

  • Longitud de montaje: ≥ Carrera + 170mm

  • Clase de protección IP: IP66W

  • Certificaciones: IEC60601-1

  • Carrera: 25~1000mm

  • Salidas de señales: Sensores Hall

  • Opciones: Desenganche manual (para sistemas de elevación de pacientes)

  • Tensión del motor: 24/36V CC (PTC)

  • Color: Negro o gris

  • Rango de temperatura de trabajo: +5°C~+45°C

  • Ideal para sistemas de elevación de pacientes

Dimensiones estándar (mm)

 

Aplicaciones Relacionadas

TiMOTON Electric Actuator Solutions for Hospital Beds-02

Hospital Beds

TiMOTION Electric Actuator Solutions for Medical Chairs

Medical Chairs

Electric Actuator Solutions for Operating Tables-02

Operating Tables

Electric Actuator Solutions for Rehabilitation Equipment-02

Rehabilitation Equipment

TiMOTION Electric Actuator Solutions for Patient Lifts

Patient Lifts

Electric Linear Actuator Solution For Patient Lift Applications

    To guarantee the electric actuators' positioning, we can provide different sensor options, including Reed and Hall effect sensors, POT, and LS to send a signal. The potentiometer provides feedback even in the event of a power failure.

    The Hall effect sensors also allow feedback on the position but require a reset following a power failure. They can also be used with a backup battery, compensating for possible power failures and avoiding resetting.

    An electric linear actuator is an electromechanical device mainly composed of a motor, a set of gears, and a motion mechanism in the form of a worm and tube. It converts the motor’s rotary motion into linear motion by driving the gears and worm gear, By providing linear movement, it can be integrated into any equipment to push, pull, lift, lower, position, or orient a load.

    Electric actuators are easy to install and operate. They require minimal maintenance and deliver accurate, efficient, safe, ergonomic, and environmentally friendly movement. These actuators can be easily integrated into industrial, medical, home furniture, or ergonomic desk applications to push, pull, raise, lower, or orient a load. With increasing power and sophistication, they can operate in any direction, gradually replacing hydraulic and pneumatic systems that are considered too constraining or cumbersome.

    Thanks to their incredible versatility, electric actuators offer numerous possibilities for movement, enabling the design of ergonomic and comfortable equipment. By adapting to individual needs, they enhance accessibility and ergonomics, promoting easy integration. Electric actuators facilitate a wide range of tasks, enhancing performance and productivity in various activities. This is why they are found in most everyday equipment across diverse applications:

    • Healthcare: hospital beds, tables, medical chairs, and carts, patient lifts, mobility aids...
    • Industry: industrial and agricultural vehicles, automated equipment, intralogistics transport equipment, window opening and ventilation systems...
    • Workspace: sit-stand desks, workstations, laboratory benches, control stations, display units...
    • Home: sofas, recliners, kitchen furniture...

    There are many types of electric linear actuators. Actuators, columns, gear motors, and others all have their specificities and their strong points. Discover the list of the different types of actuators that TiMOTION produces and adapts to the needs of equipment manufacturers:

    • Parallel electric actuators: The motor is parallel to the worm gear. Parallel electric linear actuators are usually driven by spur gears, which offer a wider range of gear ratios. These actuators allow for a greater range of loads and speeds but aren’t as quiet as actuators with worm gearing.
    • Right angle or "L" shaped electric actuators: The motor is placed perpendicular to the worm gear. A worm gear usually drives L-shaped electric linear actuators. These actuators offer fewer gear ratio choices than spur gear motors but are quieter and offer increased irreversible force.
    • In-line electric actuators: The motor is in line with the worm gear. In-line electric linear actuators, therefore, have a longer retracted length. They are usually driven by a set of planetary gears and are specifically designed to fit into tight spaces. However, they have a higher noise level.
    • Dual engines: Dual motors operate in two different directions, independently or simultaneously. They are usually driven by gears with a worm wheel and, therefore, offer a quieter movement.
    • The electric sliding actuators: Electric slide actuators allow linear movement without the use of an outer tube. The front attachment is linked to the nut, which moves along the worm gear.
    • Geared motors: Gearmotors allow the design of economic and versatile systems when combined with one or more worms. Compact, they are usually driven by gears with a worm wheel and are an ideal choice for achieving mechanical synchronization.
    • Electric lifting columns: We manufacture lifting columns for industrial, medical, and ergonomic applications. They allow the vertical movement of high loads while maintaining a high level of stability.

    It is important to select an actuator that can meet the requirements of the application. Every application has a list of unavoidable conditions. To choose the right electric linear actuator, you must first consider your application's constraints and technical priorities:

    • Load to be pushed
    • Required speed of movement
    • Duty cycle
    • Available installation space
    • Application environment requirement

    At TiMOTION, technical experts will work with you throughout your project to provide the best solution for your application. With a vertically integrated business model, TiMOTION offers highly customized solutions to meet the unique requirements of various applications, ensuring that the integration of electric linear actuation is seamless and efficient.

    TiMOTION works exclusively with Original Equipment Manufacturers (OEMs). Therefore, we do not stock, distribute, or sell any single product. For any questions, replacement, or purchase of an individual component, please contact your specific equipment manufacturer. Components are often covered by their warranty and may be available in stock for single unit distribution.

This mobile site is designed for compatibility with iOS 8.0+ or Android 5.0+ devices.